Ford Mustang Service Manual: Valve Cover LH
A modular engine is built around four modules:
- the intake module
- the cylinder head module (RH)
- the cylinder head module (LH)
- the lower engine module
While not all repairs can take advantage of the modular concept, most out-of-vehicle repairs benefit due to the reduction of necessary time and labor.
The basic engine components consist of the following:
- single overhead camshafts
- two valves per cylinder
- sequential multiport fuel injection (SFI)
- aluminum cylinder heads (6049)
- cast iron, 90-degree V-shaped cylinder block
- individual ignition coils for each spark plug
- composite-material intake manifold
- large-bore throttle body
Engine (DIAGNOSIS AND TESTING)
For basic mechanical concerns, refer to Section. Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual.
Note: Do not tow with the Shelby GT500 model. It cannot tow a trailer. Note: Do not exceed the trailer weight for your vehicle configuration listed in the chart below. Note: Make sure to take into consideration trailer frontal area. Do not exceed 12 feet ...
Accessory Drive Belt Idler Pulley - 4.6L (2V) and (4V)
Accessory Drive (Description and Operation) Component Locations- 3.8L Component Locations-4.6L ...
Engine WARNING: Do not operate the engine with the hood open until the fan blade has been first examined for possible cracks and separation. The 4.6L (4V) (281 CID) is a V-8 engine with the following features: dual overhead camshafts four valves per cyl ...