Ford Mustang Owners Manual: Universal Garage Door Opener (If Equipped)
UNIVERSAL GARAGE DOOR OPENER
The appearance of your vehicle’s universal garage door opener will vary according to your option package. Before programing, make sure you identify which transmitter you have by comparing it to the graphics below.
HomeLink®
Car2U® Home Automation System
Note
: The programming of the two types of universal garage door openers are different and have different instructions. Identify your package and refer to the instructions listed in this chapter.
Rear seats
Rear Seat Entry and Exit
Use the seatback release to fold the back of the front seat forward for rear
seat access. This release handle is located on the upper back of the front seat.
The seatba ...
Car2U® home automation system
WARNING: Make sure that the garage door and security device are free from
obstruction when you are programming. Do not program the system with the vehicle
in the garage.
WARNING: Do not use the s ...
Other materials:
Sensor - Front
Anti-Lock Control
Refer to Wiring Diagrams Cell 42 , Anti-Lock Brake for schematic and
connector information.
Special Tool(s)
Worldwide Diagnostic System
(WDS)
418-F224,
New Generation STAR (NGS)
Tester
418-F052, or equivalent scan
tool ...
Removal
Removal
1. Remove the center instrument panel register.
2. Remove the screws.
3. Disconnect the connectors.
4. Using the special tool, disconnect the temperature control cable from the
control head.
5. Remove the nuts and disconnect the vacuum connecto ...
Door Speaker - Lower
Door Speaker - Upper
Removal and Installation
1. Remove the front door trim panels (239420). For additional
information, refer to Section
2. Remove the upper speaker access cover.
3. Remove the upper speaker housing.
1. Remove the screw.
2 ...