Ford Mustang Owners Manual: Parking brake

WARNING

: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer as soon as possible.

WARNING

: Always set the parking brake fully and make sure that the transmission selector lever is securely latched in position P (automatic transmission) or position 1 (manual transmission).

To set the parking brake, pull the parking brake handle up as far as possible.

To release the parking brake:

1. Press and hold the button located at the end of the parking brake handle.

2. Pull the handle up slightly, then push the handle down.

    Hints on driving with anti-lock brakes
    When the system is operating, the brake pedal will pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal. The anti-lock bra ...

    Traction Control
    PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when ...

    Other materials:

    Wipers and Washers
    General Specifications Torque Specifications Wipers and Washers The wiper and washer system consists of the following components: windshield wiper mounting arm and pivot shaft pivot arms windshield wiper blades windshield washer reservoir ...

    Instrument Panel and Console
    Torque Specifications Instrument Panel The instrument panel consists of the following components: instrument cluster instrument panel finish panels audio unit A/C controls glove compartment door passenger air bag module glove compart ...

    Module - Passive Anti-Theft Transceiver
    Anti-Theft - Passive Anti-Theft System (PATS) (Description and Operation) The passive anti-theft system (PATS) contains the following components: theft indicator encoded ignition key transceiver module instrument cluster powertrain control module (PCM) ...