Ford Mustang Service Manual: Muffler - 4.6L (2V)

Removal and Installation

1. Use a jack to support and lower the rear axle.

2. Remove the upper arm-to-differential bolt.

3. Remove the nut and bolt, and disconnect the rear shock absorbers (18124)


3. Remove the nut and bolt, and disconnect the rear shock absorbers (18124) from the axle housing.

  • Discard the nut.

4. Lower the rear axle.


4. Lower the rear axle.

5. Remove the dual converter assembly nuts. (RH shown, LH similar.)

6. Remove the RH intermediate exhaust hanger insulator.


6. Remove the RH intermediate exhaust hanger insulator.

7. Remove the RH muffler (5230) from the rear exhaust hanger insulator


7. Remove the RH muffler (5230) from the rear exhaust hanger insulator (5260).

8. Remove the LH muffler (5230) from the rear exhaust hanger insulator


8. Remove the LH muffler (5230) from the rear exhaust hanger insulator (5260).

9. Remove the LH intermediate exhaust hanger insulator.


9. Remove the LH intermediate exhaust hanger insulator.

10. Remove the LH and RH mufflers.


10. Remove the LH and RH mufflers.

11. CAUTION: Do not use oil or grease-based lubricants on the


11. CAUTION: Do not use oil or grease-based lubricants on the insulators as they deteriorate the rubber.

NOTE: A soap-and-water solution will ease installation of the exhaust hanger insulators.

To install, reverse the removal procedure.

    Muffler - 3.8L
    Removal and Installation 1. Raise and support the vehicle. For additional information, refer to Section. 2. Support the rear axle with a suitable jack. 3. Remove the upper arm-to-differential bolt. ...

    Muffler - 4.6L (4V)
    Removal and Installation 1. Raise and support the vehicle. For additional information, refer to Section. 2. NOTE: RH side shown, LH side similar. Remove the dual converter assembly nuts. 3. Remove ...

    Other materials:

    Transmission Drive Cycle Test
    Transmission Description (Description and Operation) The 4R70W has the following features: Wide ratio gears Four speeds Rear wheel drive Automatic Electronic shift Torque converter clutch control Line pressure controls The transm ...

    Audio Unit
    Torque Specifications Audio System The Mustang is available with the following audio systems: M100 CD AM/FM CDX6-AM/FM with six CD in-dash MP3 single CD AM/FM (optional) The M100 system is equipped with four premium speakers. The CDX6 six ...

    Muffler - 4.6L (2V)
    Removal and Installation 1. Use a jack to support and lower the rear axle. 2. Remove the upper arm-to-differential bolt. 3. Remove the nut and bolt, and disconnect the rear shock absorbers (18124) from the axle housing. Discard the nut. 4. Lower the r ...