Ford Mustang Service Manual: Installation

Removal

1. Remove the roller followers. For additional information, refer to Roller Followers in this section.

2. Remove the spark plugs. For additional information, refer to Section .

3. Position the piston of the cylinder being serviced at the bottom of the stroke.

4. CAUTION: If air pressure has forced the piston to the bottom of the cylinder any loss of air pressure will allow the valve to fall into the cylinder. If air pressure must be removed support the valve prior to removal.

Use compressed air in the cylinder to hold both valves in position.

5. Using the special tool, compress the intake valve spring.


5. Using the special tool, compress the intake valve spring.

6. NOTE: Valve stem seals should be visually inspected if new seals are not


6. NOTE

: Valve stem seals should be visually inspected if new seals are not installed.

Remove the valve spring retainer keys, the valve spring retainer, the valve spring and the valve stem seal.

7. Using the special tool, compress the exhaust valve spring.


7. Using the special tool, compress the exhaust valve spring.

8. NOTE: Valve stem seals should be visually inspected if new seals are not


8. NOTE

: Valve stem seals should be visually inspected if new seals are not installed.

Remove the valve spring retainer keys, the valve spring retainer, the valve spring and the valve stem seal.

Installation


    Removal
    Removal 1. Remove the roller followers. For additional information, refer to Roller Followers in this section. 2. Remove the spark plugs. For additional information, refer to Section . 3. Position ...

    Hydraulic Lash Adjusters
    Engine WARNING: Do not operate the engine with the hood open until the fan blade has been first examined for possible cracks and separation. The 4.6L (4V) (281 CID) is a V-8 engine with the follow ...

    Other materials:

    Preliminary Inspection
    Transmission Description (Description and Operation) The 4R70W has the following features: Wide ratio gears Four speeds Rear wheel drive Automatic Electronic shift Torque converter clutch control Line pressure controls The transm ...

    Cleaning the alloy wheels
    Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. A clearcoat paint finish coats aluminum wheels and wheel covers. In order to maintain their condition: • Clean weekly with Motorcraft Wheel and Tire Cleaner. Use a sponge ...

    Roadside assistance
    Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The servic ...