Ford Mustang Service Manual: Generator - 4.6L 2V

Generator - 3.8L

Removal and Installation

1. Disconnect the battery (10655). For additional information, refer to Section.

2. Relieve the accessory drive belt (8620) tension and remove the belt from the generator pulley.

Leave the belt in place for reinstallation. For additional information, refer to Section.

3. CAUTION: This is a new style connector that has a press-to-release tab. Pulling on the tab could result in damage to the connector or harness.

Disconnect the generator (10300).

1. Disconnect the generator electrical connectors.

2. Remove the battery positive cable nut.

4. Remove the generator.


4. Remove the generator.

  • Remove the upper and lower generator bolts.

5. To install, reverse the removal procedure.


5. To install, reverse the removal procedure.

    Generator - 3.8L
    Generator - 3.8L Removal and Installation 1. Disconnect the battery (10655). For additional information, refer to Section. 2. Relieve the accessory drive belt (8620) tension and remove the b ...

    Generator - 4.6L 4V
    Generator - 3.8L Removal and Installation 1. Disconnect the battery (10655). For additional information, refer to Section. 2. Relieve the accessory drive belt (8620) tension and remove the b ...

    Other materials:

    Upper Arm
    Rear Suspension (Description and Operation)   Item Part Number Description 1 18125 Rear shock absorber 2 - Rear axle driveline vibration damper 3 5A649 Rear lower suspension arm and bushing (common LH and RH) ...

    Switch
    Control Components (Description and Operation) Manual A/C The climate control system heats or cools the vehicle interior depending on the function selector position and the temperature selected. Function selector position determines heating or cooling and ai ...

    Engine Support Insulators
    Engine Component View Cylinder Heads and Valve Train Components   Engine Front Cover Components   Engine Components   Cylinder Block and Lower End Components   Engine (DIAGNOSIS AND TESTING) Refer to Section for basic mecha ...